Washing your car can be a daunting experience if it is your first time. With the right equipment, the process can become a lot easier, and you will be able to wash your car thoroughly. Plastic buckets are tools that are essential for any car washer.
1- Holding Soapy Water
Plastics buckets are great for holding water. First, pour a small amount of soap into the bucket and swoosh it around. When it comes to soap, a little goes a long way as it expands to create large bubbles. Then, turn your garden hose all the way up and spray water into the bucket. Bubbles will rise up to the top and allow you to clean your car even more effectively. Angling the bucket can often result in a perfect amount of foam, so play around a little bit to find the best angle. Once the bucket is full, turn the water off and move it next to your car. Dipping a cloth into the plastic bucket and standing up to scrub your car is now more efficient than ever. When you are finished with the job, rinse out the bucket thoroughly and leave it to dry in a sunny place. In order to prepare for your next car wash, it is crucial that the bucket is completely dry. Lingering soap suds and water stains will alter the concentration of a future solution.
2- Holding Drying Towels
Once you are finished with the wash, you will have to wipe down the car. However, leaving these drying towels on the ground is not a smart idea. Bacteria and dirt on the ground can contaminate the cloth and make your car dirty once more! Use a plastic bucket to hold these towels until you are done with the job. “When placing towels in the bucket, it is a good idea to roll them up beforehand,” said Affordable American Containers. If you simply stuff the towels into the container, they will become wrinkled and sometimes hard to unravel. In addition, a bucket will shield the towels from water or soap. If the rag becomes drenched before it has even been used, the drying process will take an exponentially longer amount of time. For small garages, turn the bucket upside down to completely protect the towels. The most experienced washers can combine a few of these methods to reuse plastic buckets. This will save time, money, and prove your skill as a car washer.
3- Reaching New Heights
Tall individuals will be able to reach the top of their cars without a problem. If you are shorter or your vehicle is particularly large, it can be difficult to wash the top of the car. Flip a plastic bucket upside down and stand on top to reach these heights. Depending on your bucket, one might not be sturdy enough to carry hundreds of pounds. Layer two or three buckets on one another if you need extra stability. If you want to spread your legs to lower your center of mass, place two buckets about 18 inches from each other. Because you are substituting buckets for a real platform, you will want to prioritize comfort and safety. Once you have finished with a certain patch, move the bucket around the car. This also helps to signal which areas are done and which areas still need to be washed. While this can sometimes damage the rim of the bucket, it is certainly more efficient than standing on the interior ledge of an open door. Furthermore, slight damage to a bucket does not detract from its effectiveness.
When washing your car on your own, you don’t need excessively fancy equipment. Simple plastic buckets are more than sufficient for a variety of needs. With a little bit of creativity, buckets can function in many scenarios.